We are fully operational and open for business as usual - our trade counter remains closed
Significant disruption is expected for deliveries to Europe and Ireland due to Brexit/COVID

Plasma Cutters

Are you searching for a Plasma Cutter with a FREE torch & consumables, earth lead and a 3-year warranty and free fast UK delivery? Plasma cutters make cutting metal quickly very simple, from only £379+VAT with a 3-year warranty. If you work with metal you should have one! Plasma cutting is a process that is used to cut steel and other metals of different thicknesses using a plasma torch. In this process compressed air is blown at high speed out of a nozzle; at the same time, an electrical arc is formed through that gas from the nozzle of the plasma cutter to the surface being cut, turning some of that gas to plasma. This is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut.


The HF Contact type uses a high-frequency, high-voltage spark to ionise the air through the plasma cutters head and initiates an arc. This requires the plasma cutter to be in contact with the job material when starting, not so good if you have to penetrate through things like rust or painted surfaces.

The Pilot Arc type uses a two-cycle approach to producing plasma, avoiding the need for initial contact. First, a high-voltage, low current circuit is used to initialize a very small high-intensity spark within the torch body, thereby generating a small pocket of gas. This is referred to as the pilot arc. The pilot arc has a return electrical path built into the torch head. The pilot arc will maintain itself until it is brought into proximity of the workpiece where it ignites the main cutting arc. These arcs are extremely hot and are in the range of 15,000 degrees Celsius.

Plasma cutters are an effective means of cutting thin and thick materials alike. Hand-held plasma cutters can usually cut up to 2 inch (48 mm) thick steel plate, and stronger computer-controlled torches can pierce and cut steel up to 12 inches (300 mm) thick. Formerly, these plasma cutters could only work on conductive materials; however, new technologies allow the plasma ignition arc to be enclosed within the nozzle, thus allowing the cutter to be used for non-conductive workpieces such as glass and plastics. Since plasma cutters produce a very hot and very localized "cone" to cut with, they are extremely useful for cutting sheet metal in curved or angled shapes.


Inverter cutters rectify the mains supply to DC, which is fed into a high-frequency transistor inverter between 10kHz to about 200kHz. Higher switching frequencies give greater efficiencies in the transformer, allowing its size and weight to be reduced. Today's power modules are called IGBT's (Inter Gate Bipolar Transistors) and are generally found in better quality machines. IGBT based machines operate more efficiently and reliably.


The best way to decide which plasma cutter is going to be right for you is to consider the thickness of metal you intend to cut. We are always honest in what we claim our machines will cut. We quote the clean-cut depth as a benchmark for cutting thickness. This will mean that the maximum, or severance cut, will be 20 -25% higher than the clean-cut measurement. Severance cuts on most machines will normally require some finishing on the cut edge due to the cutter operating at the upper most limit of its operational envelope.

Read more Read less
0% Finance - Instant Online Decision
0% Finance - Instant Online Decision
Order by 3pm for Next-day Delivery
Order by 3pm for Next-day Delivery
3 Year Warranty on R-Tech Machines
3 Year Warranty on R-Tech Machines

Set Descending Direction

3 Item(s)

  1. £379.00 +VAT £454.80 Incl. VAT
    The R-Tech P30C plasma cutter features 8mm Genuine clean cut on mild steel and 12mm severance cut, its lightweight, portable and works of a 13A supply, features high frequency starting ...
  2. £645.00 +VAT £774.00 Incl. VAT
    The R-Tech P50HF heavy duty Plasma Cutter features a massive 18mm genuine clean cut, high frequency pilot arc starting, pilot arc re-start and cost effective - long life consumables and ...
  3. £1,245.00 +VAT £1,494.00 Incl. VAT
    The R-Tech I-Cut 100P is a heavy duty plasma cutter with a genuine 32mm clean cut, high frequency pilot arc starting, pilot arc re-start, 6M heavy duty torch and cost effective - long l ...

Set Descending Direction

3 Item(s)

Supporting You Welding

The combination of proven welding equipment, experience and skills is the key to successful welding.
We can help with welding guides, phone advice or welding videos…

How to Tig Weld

TIG welding may not be the easiest form of welding but learning how to TIG weld certainly rewards the effort…

How to Mig Weld

MIG welding may be one of the easier welding techniques but learning the finer points of the MIG welder’s art takes a little longer…

How to Plasma Cut

Welding metal is important, but sometimes you need a fast, accurate way to cut the stuff. That’s where plasma cutting comes into its own…

How to TIG Weld Video

Reading about TIG welding is one thing, but watching an experienced welder demonstrate the TIG art is something else…

Get our latest news and offers direct to your inbox

Talk to the R-Tech Team

With over 130 years’ combined experience in welding and welding equipment, we’ve got the information, answers and products you need. Let’s talk welding!


Paypal Visa American Express Mastercard

SecurityMetrics Credit Card Safe